(888) 823-5247

The Importance of GFCI

Ground-Fault Circuit Interrupters (GFCI)

A ground-fault occurs when there is a break in the low-resistance grounding path from a tool or electrical system. The electrical current may then take an alternative path to the ground through the user, resulting in serious injuries or death. The ground-fault circuit interrupter, or GFCI, is a fast-acting circuit breaker designed to shut off electric power in the event of a ground-fault within as little as 1/40 of a second. It works by comparing the amount of current going to and returning from equipment along the circuit conductors. When the amount going differs from the amount returning by approximately 5 milliamperes, the GFCI interrupts the current.

The GFCI is rated to trip quickly enough to prevent an electrical incident. If it is properly installed and maintained, this will happen as soon as the faulty tool is plugged in. If the grounding conductor is not intact or of low-impedance, the GFCI may not trip until a person provides a path. In this case, the person will receive a shock, but the GFCI should trip so quickly that the shock will not be harmful.

The GFCI will not protect you from line contact hazards (i.e. a person holding two "hot" wires, a hot and a neutral wire in each hand, or contacting an overhead power line). However, it protects against the most common form of electrical shock hazard, the ground-fault. It also protects against fires, overheating, and destruction of wire insulation.

For construction applications, there are several types of GFCIs available, with some variations:

Receptacle Type

The Receptacle Type incorporates a GFCI device within one or more receptacle outlets. Such devices are becoming popular because of their low cost.

Portable Type

Portable Type GFCIs come in several styles, all designed for easy transport. Some are designed to plug into existing non-GFCI outlets, or connect with a cord and plug arrangement. The portable type also incorporates a no-voltage release device that will disconnect power to the outlets if any supply conductor is open. Units approved for outdoor use will be in enclosures suitable for the environment. If exposed to rain, they must be listed as waterproof.

Cord-Connected Type

The Cord-Connected Type of GFCI is an attachment plug incorporating the GFCI module. It protects the cord and any equipment attached to the cord. The attachment plug has a non-standard appearance with test and reset buttons. Like the portable type, it incorporates a no-voltage release device that will disconnect power to the load if any supply conductor is open.

Because GFCIs are so complex, they require testing on a regular basis. Test permanently wired devices monthly, and portable-type GFCIs before each use. All GFCIs have a built-in test circuit, with test and reset buttons, that triggers an artificial ground-fault to verify protection. Ground-fault protection, such as GFCIs provide, is required by OSHA in addition to (not as a substitute for) general grounding requirements.


Source: U.S. Dept. of Labor Office of Safety & Health Administration

24 Hour Emergency Service • Call Us Today • (888) 823-5247 • or • Fill Out Our Online Form
24 Hour Emergency Service
Call Us Today
(888) 823-5247
Fill Out Our Online Form
Send Us a Message
 
 
Payment Options
 
 
For furnace in Bowie MD, we accept most major credit cards.
We accept cash for heating repair service provided in Crofton MD.
We accept check for heat pump repair service provided in Annapolis MD.
Belair Engineering and Service Company, Inc. accepts all major credit cards, cash, and local, personal checks. We also offer a variety of financing options. Contact us for more information
 
Connect With Us
 
Belair Engineering and Service Company, Inc. is the 2017 Capital Readers Choice Winner!
Contact Information
 
Belair Engineering and Service Company, Inc.
Address:  15881 Commerce Court
 Upper Marlboro, MD 20774
Phone:     (301) 249-0300
Toll Free:  (888) 823-5247
Fax:         (301) 249-0302
Belair Engineering and Service Company, Inc.
Address:  15881 Commerce Court
Upper Marlboro, MD 20774
Phone:     (301) 249-0300
Toll Free:  (888) 823-5247
Fax:          (301) 249-0302
Schedule Service
Home   |   Email Us   |   Schedule Service   |   Get a Quote   |   Ask a Tech   |   Maintenance   |   Employment   |   Privacy Policy
GBCC member, Belair Engineering is the boiler & heat pump repair service in Bowie MD. We are a proud ACCA member, so trust us with your furnace repair service in Annapolis MD. Associated Builders and Contractors for better heat pump and furnace repair service in Bowie MD. Heating and air conditioning contractors in The Crofton Chamber of Commerce; Trust them with your boiler unit repair in Bowie MD. Get a Energy star heat pump installation done by Belair in Bowie MD. Heat Pump & boiler repair service in Bowie MD. Generators & boiler Unit repair service in Crofton MD. Nate member for better heat pump repair service in Crofton MD. Be Eco friendly with a boiler Unit installation in Crofton MD. Lead safe heat pump and furnace repair or installation in Bowie MD. Come see the Gas fireplace inserts & gas fire logs installation in our Bowie MD showroom! Hearth patio & barbecue repair service in Expo in Crofton MD. NCI member to help furnace repair service in Bowie MD. Service Roundtable member; heat pump service and heating repair in Annapolis MD.